CS 028/CSL 028 | 150W to 400W

网站首页 > CS 028/CSL 028 | 150W to 400W
  • Small, compact design
  • Quiet in operation
  • Dynamic heating up
  • Clip or screw fixing

These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors. The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium.

TECHNICAL DATA

DOWNLOAD PDF

Heating element PTC resistor - temperature limiting
Axial fan, ball bearing air flow, free flow
CS 028: 13.8m³/h
CSL 028: 45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
Connection

2-pole clamp max. 2.5mm²(CSL 028 with strain relief),

clamping screw torque 0.8Nm max.

Casing plastic according to UL94 V-0, black

Mounting

clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3mm)

Fitting position vertical airflow (air outlet up)
Dimensions see drawings
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note

other voltages on request

FAN HEATER CS 028

Art. No.
clip fixing
Art. No.
screw fixing
Operating
voltage
Heating
capacity¹
Inrush
current
max.
Recommended
pre-fuse T
(time-delay)
Weight
(approx.)
Approvals

02800.0-00 02800.0-01 230VAC, 50/60Hz 150W 12.0A 10.0A 0.3kg VDE UL EAC
02800.9-00 02800.9-01 120VAC, 50/60Hz 150W 6.0A 10.0A 0.3kg - UL File No. E234324 EAC

FAN HEATER CSL 028

Art. No.
clip fixing
Art. No.
screw fixing
Operating
voltage
Heating
capacity¹
Inrush
current
max.
Recommended
pre-fuse T
(time-delay)
Weight
(approx.)

Approvals

02811.0-00 02811.0-01 230VAC, 50/60Hz 250W 9.0A 10.0A 0.5kg VDE UL EAC
02810.0-00 02810.0-01 230VAC, 50/60Hz 400W 15.0A 16.0A 0.5kg VDE UL EAC
02811.9-00 02811.9-01 120VAC, 50/60Hz 250W 6.0A 10.0A 0.5kg - UL File No. E234324 EAC
02810.9-00 02810.9-01 120VAC, 50/60Hz 400W 9.0A 10.0A 0.5kg - UL File No. E234324 EAC
¹ at +20°C (+68°F) ambient temperature

ACCESSORY PART FOR FAN HEATER CSL 028


Air duct for improved heat distribution


The air duct is an accessory part for use with the fan heater CSL 028. It can easily be clipped onto the protective grille of the fan heater without use of any tools, and diverts the exiting warm air by 45°. This results in an overall improved heat distribution within an enclosure or cabinet. The temperature above the protective grille is reduced by up to 20 °C (measured 100 mm above protective grille) and may make the use of a heat conduction plate obsolete.

Art. No. Dimensions² Plastic 1 Packing unit Weight (approx.)
252017 85 x 85 x 12 mm according to UL94 V-0, black 1 piece 35 g

² Dimensions when mounted on fan heater.

Fan heater with air duct

Air duct Art. No. 252017

TECHNICAL DRAWING - CLIP FIXING

Fan heater CS 028 with clip fixing
Fan heater CSL 028 with clip fixing

TECHNICAL DRAWING - SCREW FIXING

Fan heater CS 028 with screw fixing

,,,
Fan heater CSL 028 with screw fixing