CSK 060 | 10W, 20W

网站首页 > CSK 060 | 10W, 20W
  • Low surface temperature
  • Double insulated (plastic housing)
  • Wide voltage range
  • Dynamic heating up
  • Clip fixing

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation.



Operating voltage 120 - 240V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Surface temperature < +85°C (+185°F) (according to VDE 0100),
except upper protective grille
Connection 2-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Dimensions 98 x 38 x 75mm
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45°C to +70°C (-49°F to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Approvals VDE, UL File No. E150057, EAC
Note other voltages on request

¹ Operating with voltages below 140V AC/DC reduces heating performance by approx 10%.

Art. No. Heating capacity² Inrush current max. Recommended
pre-fuse T (time-delay)
Weight (approx.)
06040.0-00 10W 1.0A 2.0A 0.2kg
06030.0-00 20W 2.5A 4.0A 0.3kg

² at +20°C (+68°F) ambient temperature


Touch-safe Small Heater CSK 060 Series (Semiconductor)