CR 130 | 950W

网站首页 > CR 130 | 950W
  • Compact design
  • Double insulated
  • Integrated thermostat or hygrostat
  • Optional clip or screw fixing

The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. The fan heater is available with integrated thermostat or pre-set hygrostat for temperature or humidity control. The CR 130 was designed as a stationary unit for wall fixing. For fixing on the bottom of the enclosure the fan heater CR 030 is recommended.

TECHNICAL DATA

DOWNLOAD PDF

Heating element high performance cartridge
Temperature safety cut-out with automatic reset and second-tier one shot fuse
to protect against overheating in case of fan failure
Heater body extruded aluminium profile
Axial fan, ball bearing

airflow 160m³/h, free flow,
service life 50,000h at +25°C (+77°F)

Connection 2-pole max. 2.5mm², clamping screw with strain relief,
torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715 or screw fixing (M6)
Fitting position vertical airflow (air outlet up)
Dimensions 182 x 160 x 99mm
Weight approx. 1.5kg
Operating¹/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other heating capacities from 200W up available on request

¹ Operating temperature of heater with integrated hygrostat: 0 to +60°C (+32 to +140°F)

Art. No. Model Operating voltage Heating capacity Recommended
pre-fuse T (time-delay)
Setting range² Approvals
13051.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 950W 6.3A 0 to +60°C VDE UL File No. E234324 EAC
13051.0-02 Fan Heater with hygrostat 230VAC, 50/60Hz 950W 6.3A 65% RH, factory-set VDE UL File No. E234324 EAC
13059.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 950W 10.0A +32 to +140°F - UL File No. E234324 EAC

² Switch temperature difference 7K (±4K tolerance)

TECHNICAL DRAWING


Fan Heater CR 130 (effective since 05.06.2018)