CS 032 / CSF 032 | 1000W

网站首页 > CS 032 / CSF 032 | 1000W
  • Compact and slim design
  • High heating performance
  • Double insulated
  • With or without thermostat
  • Quick connection

The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. Two screw connectors at the front of CS 032 allow comfortable wiring of an external thermostat. The CSF 032 is equipped with a pre-set thermostat. Both models were designed for wall fixing. A fan heater for fixing on the bottom of the enclosure is available on request.

TECHNICAL DATA

DOWNLOAD PDF

Heating element PTC resistor - temperature limiting
Surface temperature max. +80°C (+176°F), except upper protective grille
at +20°C (+68°F) ambient temperature
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing air flow 63m³/h, free flow
service life 70,000h at +25°C (+77°F)
Connection male power insert connector according to IEC320 C18
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715 or
screw fixing (M5), tightening torque 2Nm max.
Fitting position airflow direction up
Dimensions 152.5 x 88 x 66mm
Weight approx. 0.5kg
Operation/Storage temperature -40 to +60°C (-40 to +140°F) / -40 to +70°C (-40 to +158°F)
Operation/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Approvals VDE, UL File No. E234324, EAC

Important note:Connectors and cables for electrical connection are not included in the delivery. Connection cables can be ordered separately, see Accessories.

FAN HEATER CS 032 (WITHOUT THERMOSTAT)

Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity¹ Inrush current max.
03209.0-00 03209.0-01 220-240VAC, 50/60Hz 1,000W 12.0A
03209.9-00 03209.9-01 100-120VAC, 50/60Hz 1,000W 18.0A

FAN HEATER CSF 032 (WITH THERMOSTAT)

Art. No. Clip fixing Art. No. Screw fixing Operating voltage Heating capacity¹ Inrush current max. Switch-off temperature² Switch-on temperature²
03201.0-00 03201.0-01 220-240VAC, 50/60Hz 1,000W 12.0A +25°C (+77°F) +15°C (+59°F)
03202.0-00 03202.0-01 220-240VAC, 50/60Hz 1,000W 12.0A +15°C (+59°F) +5°C (+41°F)
03201.9-00 03201.9-01 100-120VAC, 50/60Hz 1,000W 18.0A +25°C (+77°F) +15°C (+59°F)
03202.9-00 03202.9-01 100-120VAC, 50/60Hz 1,000W 18.0A +15°C (+59°F) +5°C (+41°F)

¹ at +25°C (+77°F) ambient temperature; ² tolerance ±5K
Note: Other switch-off and switch-on temperatures on request.

ACCESSORIES

CONNECTION CABLE WITH FEMALE POWER INSERT CONNECTOR ACCORDING IEC320 C17

Art. No. Length (L)
244379 1.0m
244380 2.0m

RETAINING CLIP

Art. No. Note
237009 Suitable for female power insert connector on connection cable 244379 and 244380

TECHNICAL DRAWING


Fan heater CSF 032