CS 130 | 1200W

网站首页 > CS 130 | 1200W
  • Compact design
  • High heating performance
  • Double insulated
  • Integrated thermostat (optional)
  • Optional clip or screw fixing

The compact high performance fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic housing provides double insulation and acts as protection against contact. The fan heater is available with optional integrated thermostat for temperature control. The CS 130 was designed as a stationary unit for wall fixing. For fixing on the bottom of the enclosure the fan heater CS 030 is recommended.



TECHNICAL DATA

DOWNLOAD PDF

Heating element PTC resistor - temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing airflow 160m³/h, free flow
service life 50,000h at +25°C (+77°F)
Connection 2-pole max. 2.5mm², clamping screw with strain relief,
torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715 or screw fixing (M6)
Fitting position vertical airflow (air outlet up)
Dimensions 182 x 160 x 120mm
Weight approx. 1.3kg
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Art. No. Model Operating voltage Heating capacity¹ Inrush current max. Recommended
pre-fuse T (time-delay)
Setting range² Approvals
13060.0-00 Fan Heater with thermostat 230VAC, 50/60Hz 1,200W 13.0A 10.0A 0 to +60°C VDE UL File No. E150057³ EAC
13060.0-01 Fan Heater without thermostat 230VAC, 50/60Hz 1,200W 13.0A 10.0A - VDE UL File No. E150057³ EAC
13060.9-00 Fan Heater with thermostat 120VAC, 50/60Hz 1,200W 16.0A 16.0A +32 to +140°F - UL File No. E150057³ EAC
13060.9-01 Fan Heater without thermostat 120VAC, 50/60Hz 1,200W 16.0A 16.0A - - UL File No. E150057³ EAC

¹ at +20°C (+68°F) ambient temperature; ² Switch temperature difference 7K (±4K tolerance); ³ according to UL 508A, NITW File on request

TECHNICAL DRAWING


Fan Heater CS 130 (effective from 05.06.2018)