温度控制器 | FTO 011/FTS 011
(預設值)

网站首页 > 温度控制器 | FTO 011/FTS 011
(預設值)
  • Small size
  • Default temperature settings
  • Easy to install
  • High switching accuracy

Tamper-proof (Pre-set) Thermostat FTO 011: Contact breaker/NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising.

Tamper-proof (Pre-set) Thermostat FTS 011: Contact maker/NO (blue casing) for regulating filter fans, heat exchangers, cooling devices or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.

TECHNICAL DATA

DOWNLOAD PDF

Sensor element thermostatic bimetal
Contact type snap-action contact
Service life > 100,000 cycles
Max. switching capacity 250VAC, 5 (1.6) A / 120VAC, 10 (2) A
DC 30W
Max. inrush current AC 16A for 10 sec.
Connection 2-pole terminal, clamping torque 0.8Nm max.:
rigid/stranded1wire 2.5mm² (AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 47 x 33 x 33mm
Weight approx. 30g
Fitting position variable
Operating/Storage temperature -40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
Approvals VDE, UL File No. E164102, EAC

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No. Contact Switch-off temperature Switch-on temperature
01160.0-00 Contact breaker (NC) +15°C / +59°F (±5K tolerance) +5°C / +41°F (±5K tolerance)
01160.0-01 Contact breaker (NC) +25°C / +77°F (±5K tolerance) +15°C / +59°F (±5K tolerance)
01160.0-05 Contact breaker (NC) +10°C / +50°F (±5K tolerance) 0°C / +32°F (±5K tolerance)
Switch-on temperature Switch-off temperature
01161.0-00 Contact maker (NO) +50°C / +122°F (±7K tolerance) +40°C / +104°F (±6K tolerance)
01161.0-01 Contact maker (NO) +60°C / +140°F (±7K tolerance) +50°C / +122°F (±7K tolerance)
01161.0-02 Contact maker (NO) +35°C / +95°F (±7K tolerance) +25°C / +77°F (±6K tolerance)

Note:Other switch-off and switch-on temperatures on request.

TECHNICAL DRAWING


Tamper-proof Thermostats (Pre-set) FTO 011 / FTS 011