电子式温度控制器 | ETL 011 (直流)

网站首页 > 电子式温度控制器 | ETL 011 (直流)
  • Large setting range
  • Small hysteresis
  • Optical operating display (LED)
  • Change-over contact
  • Signal application

The electronic thermostat registers the surrounding air temperature and can switch a signal current via its internal relay with a potential-free change-over contact. Signal-processing devices can be controlled directly with the ETL 011. In order to control heating and cooling equipment, filter fans and signal devices the switch module SM 010 or a similar device is needed. The LED integrated in the adjustment knob shows the closed status of the contact 1-2. When temperature is rising contact 1-2 opens and the LED turns off. In currentless state (no supply voltage) contact 1-2 opens.

TECHNICAL DATA

DOWNLOAD PDF

Switch temperature difference 4K (±1K tolerance) at +20°C (+68°F)
Sensor element NTC
Reaction time approx. 5 sec.
Contact type change-over contact (relay)
Service life >100.000 cycles (at 10mW)
Max. switching current (relay output) DC 0.5A at 48VDC
Min. switching capacity DC 10mW (at 0.1V, 100mA or 1mA, 10V)
Optical indicator LED
Connection 5-pole terminal, clamping torque 0.5Nm max.:
rigid wire/stranded wire12.5mm² (AWG 14)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 64.5 x 42 x 38mm
Weight approx. 70g
Fitting position vertical
Operating/Storage temperature -40 to +85°C (-40 to +185°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20

1When connecting with stranded wires, wire end ferrules must be used.

Art. No. Operating voltage Setting range Approvals
01131.2-00 12-48VDC (min. 10VDC, max. 60VDC) -20 to +60°C UL File No. E164102 EAC
01131.2-01 12-48VDC (min. 10VDC, max. 60VDC) -4 to +140°F UL File No. E164102 EAC

TECHNICAL DRAWING


Electronic Thermostat ETL 011