直流大功率继电器 | SM 010 ,24或48VDC

网站首页 > 直流大功率继电器 | SM 010 ,24或48VDC
  • High DC switching capacity
  • Variety of applications
  • Compact design
  • Simple connection
  • Clip fixing

The Switch Module is designed for switching DC equipment with high currents. It is controlled via an external, potential-free contact (thermostat or hygrostat) connected between terminals 1 and 2. For switching the Module, the internally generated signal current has to be used. It must ne ensured that the external contact can safely switch this signal current. The SM 010 is available in24VDC and48VDC versions.

TECHNICAL DATA

DOWNLOAD PDF

Contact type contact maker normally open (Relay/MOSFET)
Service life > 100,000 cycles
Max. inrush current DC 16A
Connection 6-pole terminal, clamping torque 0.5Nm max.:
rigid wire 2.5mm² (AWG 14)
stranded wire11.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 46mm
Weight approx. 90g
Fitting position variable
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type IP20
Approvals UL File No. E342261, EAC

¹ When connecting with stranded wires, wire end ferrules must be used.

Art. No. Operating voltage Max. switching capacity Signal current
01001.0-00 24VDC (20-28VDC) 28VDC, 16A 13mA at 20VDC / 22mA at 28VDC
01000.0-00 48VDC (38-56VDC) 56VDC, 16A 10mA at 38VDC / 18mA at 56VDC

TECHNICAL DRAWING


Switch Module SM 010 (24VDC + 48VDC)