直流大功率继电器 | DCM 010,DC 20至56V

网站首页 > 直流大功率继电器 | DCM 010,DC 20至56V
  • High DC switching capacity
  • Variety of applications
  • Wide DC voltage range
  • Simple connection

The switch module is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ensured that the external contact is suitable to switch the required signal current without any problems.

TECHNICAL DATA

DOWNLOAD PDF

Contact type contact maker normally open (MOSFET)
Service life > 100,000 cycles
Operating voltage DC 20 to 56 V
Control contact – signal current 3 mA at DC 20 V / 4.5 mA at DC 24 V
14 mA at DC 48 V / 17 mA at DC 56 V
Connection 6-pole terminal: stranded wire11.5 mm² (AWG 16);
max. 2.5 mm² (AWG 12)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, grey (bicolor)
Dimensions 93 x 53 x 44 mm
Weight approx. 65 g
Fitting position vertical
Operating temperature see article table below
Storage temperature -40 to +80 °C (-40 to +176 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type IP20
Approvals UL File No. E342261, VDE, EAC
Note other versions on request

1When connecting with stranded wires, wire end ferrules must be used.

Art. No. Max. switching capacity Operating temperature
01010.0-00 DC 15 A -30 °C to +40 °C (-22 °F to +104 °F)
01010.0-10 DC 13 A -30 °C to +50 °C (-22 °F to +122 °F)
01010.0-20 DC 11 A -30 °C to +60 °C (-22 °F to +140 °F)

TECHNICAL DRAWING


Switch Module DCM 010 (DC 20 to 56 V)