导轨固定架 SF 095
- Direct fixing of small appliances and
35mm DIN rails
- Simple to mount
With STEGOFIX small appliances can be mounted in enclosures significantly quicker, easier and more economically than before, without drilling holes. Mounting DIN rails is a simple matter with STEGOFIX. Longer rails are mounted on several STEGOFIX units and joining two rails is also not a problem. Subsequent changes and the mounting of additional appliances can be carried out with ease – even in confined spaces. STEGOFIX is a self-adhesive plastic unit with an adhesion power which will bear a continuous load of 500g. The high-performance industrial adhesive band is also non-ageing and designed with safety tolerances.
|Load||500g after a 24h waiting period¹|
|Mounting||self-adhesive (non-ageing, high-performance adhesive band)|
|Material||plastic according to UL94 V-0|
|Dimensions||43 x 38 x 14mm|
|Screw pitch||12.8mm, Ø 3.6mm; for perforated 35mm DIN rails|
|Operating/Storage temperature||-45 to +70°C (-49 to +158°F)|
¹ depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher loads were achieved.
STEGOFIX can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except polyethylene, polypropylene and rubber). The surfaces must be dry, free from dust, oil, separating agents and other contamination.
Note:When using the STEGOFIX as a DIN rail holder, only DIN rails (EN 60715) with perforation 18 x6.2mm or 18 x 5.2mm can be used.
|Art. No.||1 packing unit||Weight (approx.)|
|09510.0-01||5 pieces||60g (12g/pc.)|