导轨固定架PLUS | SFP 095

网站首页 > 导轨固定架PLUS | SFP 095
  • Alternative to 35 mm DIN rail
  • Easy/flexible installation
  • For devices and sockets with DIN rail mounting clip
  • Screw mounting
  • Self-adhesive tape mounting
  • Magnet mounting

The appliance holder STEGOFIX PLUS is the flexible alternative to a 35 mm DIN rail. It allows for a quick and easy installation of small devices or accessory equipment intended for DIN rail mounting. STEGOFIX PLUS is suitable for devices with a clip width of max. 66 mm, offering a convenient mounting method for almost any application: screw mounting with 25 mm pitch, high-performance adhesive tape or rubberized neodymium magnets.

TECHNICAL DATA

DOWNLOAD PDF

Areas of application devices with DIN rail mounting clip suitable for a 35 mm DIN rail
according to EN 60715, max. clip width 66 mm
Mounting
> Screw mounting



> Self-adhesive tape mounting

> Magnet mounting


e.g. tapping screws DIN 7981 (ISO 7049), Ø 5.5 mm;
thread-forming screws DIN 7500, M5;
(not included in delivery)

adhesive surface 65 x 25 mm

2 neodymium magnets, rubberized

Material plastic according to UL94 V-0, black
Dimensions 71 x 40 x 15 mm
Operating temperature -35 to +75 °C (-31 to +167 °F)
Storage conditions (self-adhesive tape) optimal storage conditions for self-adhesive tape
approx. +20 °C (+68 °F) at 50 % RH
Approvals EAC
Art. No. Model Max. Holding force1 1 packing unit Weight (approx.)
09550.0-05 Screw mounting - 5 pieces 65 g (13 g/pc.)
09550.1-05 Self-adhesive tape mounting 75 N 5 pieces 70 g (14 g/pc.)
09550.2-05 Magnet mounting 30 N 5 pieces 145 g (29 g/pc.)

1At room temperature. Depending on the conditions of use (e.g. surface condition, size of device to be mounted, etc.) the actual holding force may differ from the values specified in the table above.

Self-adhesive tape mounting

Magnet mounting

APPLICATION EXAMPLE

TECHNICAL DRAWING

STEGOFIX PLUS SFP 095